Aluminium Glass Windows in Carseldine
Made in our Brendale factory, about 14 min from Carseldine.
Minutes from our factory
Carseldine windows, made just up the road in Brendale
Our factory and showroom sit at Brendale, about 10 km from Carseldine by road. Carseldine jobs run as part of our regular North Brisbane and Pine Rivers rounds, with the service fleet based at that factory. We've made and installed glass since 1972, and we still build the frames ourselves instead of ordering them in. That short distance matters more than it sounds. The person who measures your opening and the bench that builds your window work for the same business.
10,093 residents (ABS 2021 Census)
We make and fit windows for Carseldine, about 14 min from our Brendale workshop.
Why Carseldine chooses custom aluminium glass windows
A single line runs through Carseldine, and the suburb grew along it. Carseldine station opened on the Caboolture line in June 1986, and the streets around it filled out through the 1980s and 90s. Those decades left the housing the suburb is still known for: brick and tile, single and double storey. At the 2021 Census, 71.3% of occupied private dwellings here were separate houses. Homes of that age often still carry their original aluminium windows, fitted within a few years of each other and weathered the same way ever since. When you own a separate house, that replacement call is yours to make, so the question lands with you rather than a body corporate.
The other end of the suburb is doing the opposite. The former QUT campus at 532 Beams Road, 53 hectares of it, is being redeveloped by Economic Development Queensland into the Carseldine Urban Village: around 900 homes, plus retail, commercial and recreation space. The northern part of Carseldine already carries newer 2000s housing on smaller blocks. One map, two jobs. Openings pushing 40 years old at one end, openings that haven’t been built yet at the other.
Each end needs a different window and a different conversation.
On a new build or a major renovation, Queensland has applied the NCC 2022 energy provisions since 1 May 2024, including the 7-star NatHERS rating, and glazing is one of the strongest factors in getting there. In Brisbane’s climate solar heat gain is one of the key numbers to weigh, alongside the U-value, because keeping summer heat out matters more here than holding warmth in. That points at double-glazed units and performance glass, and we make both.
Replace old windows with new ones the same size in a 1990s Carseldine house and that rule generally doesn’t apply. The opening does. Houses of that age were framed to suit the house rather than a catalogue, so a stock frame often won’t sit right. We build each window to the measured width and height of your actual opening, at our 1,700 sqm factory in Brendale about 10 km away. Our installers hold Cert III in Glass and Glazing and Cert III in Carpentry. On a brick house that’s shifted a little over four decades, that second trade is what squares the reveal before the new frame goes in.
Aluminium glass windows we make for Carseldine
We make five aluminium window styles: sliding, awning, casement, double-hung and louvre, built on Vantage systems with Breezeway blades in the louvres. Double-glazed and performance glass units are part of the range too. The sealed gap between two panes is what slows heat transfer and cuts outside noise compared with single glazing, which is the pairing that matters on a subtropical block where solar heat gain sits alongside U-value as a metric to watch, and on the streets within earshot of the rail line and the Gympie Road corridor.
Common window problems we solve in Carseldine
Condensation and mould around single-glazed windows
With single glazing, the inside face of the glass sits close to the outdoor temperature, so warm indoor air meets a cold surface and drops its moisture right there. It shows up first in a room you close up and stop ventilating, where that warm, damp air has nowhere to escape to but the cold pane. Carseldine's housing is largely brick and tile from the 1980s and 90s. Water sitting on frames and sills week after week feeds mould, and mould in a bedroom is a health problem before it's a glazing problem. A double-glazed unit puts a sealed gap between two panes, which keeps the inner pane nearer room temperature and cuts the condensation at its source. We build those units into replacement frames made to your existing openings, so nothing about the wall has to change.
Choosing louvre, awning or casement windows for cross-ventilation
On Carseldine's newer northern streets the 2000s builds sit on smaller blocks, so there is less room between one house and the next for air to move, and what each window does with its opening starts to count. Cross-ventilation needs air in one side of the house and out the other, and the window style decides how much of the opening actually opens. That comes down to how the sash moves rather than any rated figure: a two-panel slider clears roughly half its opening, because one panel has to park behind the other, louvre blades open across close to the full width at an angle you set, a casement swings outward, and an awning sash hangs over the opening while it is open. Sliding, awning, casement, double-hung and louvre are the five styles we make. Pick the wrong style and you've paid for a window that can't do the one job you bought it for. We make all five styles ourselves, so nobody's steering you towards whatever happens to be in stock. Louvres are built with Breezeway blades. At the free on-site measure we walk the house and work out which rooms need the airflow and which just need the light.
Cutting traffic and rail noise with double glazing
The station and Gympie Road, the suburb's commercial corridor, are both part of daily life here, and both make noise. Homes within earshot of either one live with a steady background of trains and traffic, and single glazing does little to hold it back. Noise you can't shut out at night is the thing that makes people replace windows they'd otherwise leave alone for years. A double-glazed unit is two panes with a sealed gap between them, and that gap cuts outside noise compared with single glazing. We won't quote you a decibel figure, because your walls, roof and ceiling all change the result. Ask for a double-glazed price alongside the standard one at the free measure and compare the two.
Failed or foggy double-glazed units
Every double-glazed unit depends on the seal around its spacer. Once that seal gives way, moist air works into the gap and fogs the glass from the inside, where no cloth will ever reach it. A fogged unit has stopped doing the heat and noise job you paid for, and the haze only spreads from there. Glass repair and replacement is one of our services, and double glazing is part of the range we build. Whether a fogged unit can be dealt with on its own or the frame has to come out is a question for the free on-site measure, so we look at the frame first and price it from there. That's worth knowing before you buy. As Carseldine adds new homes at the Urban Village, more of them will carry double glazing, because 7-star builds lean hard on their glazing. Knowing which part of the window has actually failed is what keeps a future fix proportionate to the problem.
Recent window work from our Brendale workshop
Custom window work
Architectural glass windows in Carseldine
Not every Carseldine job is a like-for-like swap. A renovation on a double-storey brick house might want full-height glass in a new living area, a window that turns a corner, or a bank of louvres running the width of a wall to pull air through. New builds on the smaller northern blocks ask similar questions. There's no separate catalogue for this work. If you've searched for architectural glass windows in Carseldine, what you're really after is the same five styles we make every day, built to sizes no stock range carries. We fabricate on Vantage systems, with Breezeway blades in the louvres. Bring the plans, or just the rough idea, and we'll tell you what the systems will and won't do at the sizes you want.
Why Carseldine trusts Superior Glass
Superior Glass has made and fitted glass since 1972, and it's still Australian family owned, with director Nathan Fox in the business day to day. We manufacture what we install. Every window comes out of our own 1,700 sqm factory and showroom at 241 Leitchs Road, Brendale, and our own crews fit it. Installers hold Cert III in Glass and Glazing plus Cert III in Carpentry, which earns its keep on brick openings pushing 40 years. Queensland law requires a QBCC Glass, Glazing and Aluminium licence for paid glazing work, and we're QBCC licensed and insured. New external windows have to meet AS 2047, which covers wind pressure, water and air performance, while AS 1288 sets where Grade A safety glass is required. We build on Vantage systems with Breezeway louvre blades. Window installations carry a workmanship guarantee. Every job runs the same five steps: site assessment, design and quote, manufacturing, installation, then final inspection and handover. The measure and quote are free. Call 07 3353 1588 or email sales@superiorglass.com.au.
Other glazing services in Carseldine
Glass Doors
Sliding, stacking, bi-fold and architectural glass doors, made to measure.
Learn more
Security Screens
Prowler Proof and Crimsafe screens and doors to the AS 5039 series.
Learn more
Shower Screens
Frameless, semi-frameless and framed shower screens, cut to fit.
Learn more
Commercial Glass
Shopfronts, office partitions and commercial glazing.
Learn moreFrom Quote to Installation
Consultation
We discuss your project and provide expert advice on the best solution for your property.
Measure
Our team visits your site to take precise measurements for a perfect fit.
Manufacture
Your order is custom built in our 1,700 sqm Brendale factory.
Install
Our qualified glaziers professionally install your product with care and precision.
Inspect
We inspect the finished work to make sure everything meets our quality standards.
Consultation
We discuss your project and provide expert advice on the best solution for your property.
Measure
Our team visits your site to take precise measurements for a perfect fit.
Manufacture
Your order is custom built in our 1,700 sqm Brendale factory.
Install
Our qualified glaziers professionally install your product with care and precision.
Inspect
We inspect the finished work to make sure everything meets our quality standards.
Aluminium Glass Windows in Carseldine: your questions answered
Everything is made at our factory and showroom at 241 Leitchs Road, Brendale, roughly 10 km from Carseldine. That's our only site, so there's no Carseldine office or shopfront. You're welcome to come and handle the frames, the louvre blades and the glass options before you decide. Or we come to you for the free on-site measure and quote, then the windows are built at Brendale and brought back for the install.
Often it won't. The brick-and-tile streets that filled out through Carseldine's main growth decades were built opening by opening, not to a modern catalogue size. So we measure first and manufacture second. Each window is made to the width and height of your actual opening at the Brendale factory. If four decades of settling have pulled a reveal out of square, our installers hold Cert III in Carpentry as well as Cert III in Glass and Glazing, so it gets corrected during the fit.
Generally, no. Queensland has applied the NCC 2022 energy provisions, including the 7-star NatHERS rating, since 1 May 2024, and they cover new builds and major renovations. Swapping old windows for new ones the same size normally doesn't trigger it. If you are doing a major renovation, or building new, glazing is one of the strongest factors in reaching 7 stars, so it's worth pricing properly. We can quote double glazing and performance glass either way.
Compared with single glazing, yes, and the sealed gap between the two panes is what does it. The more useful question is where to spend it. On the measure we go room by room, because a bedroom you sleep in with the windows shut is a different problem from a living area you keep open anyway, and doing every opening in the house at once is a much bigger number. Frames count here too. External windows are rated for air infiltration under AS 2047, so a sash that pulls up tight is already doing part of the job before the glass gets involved. Tell us which rooms bother you and we'll price those.
Louvre windows open close to the full opening and let you set the angle of the airflow, which suits a closed-up brick house. We build them with Breezeway blades. Where a room needs air but also cops the weather, an awning window is often the better pick, because the sash hangs over the opening while it's open. We make both styles, so the choice gets made at the measure on the room in front of us.
Earlier than most people do. Glazing is one of the strongest factors in a home reaching the 7-star NatHERS rating Queensland has applied since 1 May 2024. In Brisbane's climate solar heat gain and U-value are the metrics that carry most weight, so which glass goes where matters as much as the frames. Bring the plans to the Brendale showroom and we'll work through sizes, styles, glass types and frame colours while changes are still cheap.
What Carseldine customers say
Also making windows for suburbs near Carseldine
Sources & references
- Australian Bureau of Statistics: Carseldine (2021 Census)
- Queensland Places: Carseldine
- Queensland Building and Construction Commission
- Australian Standard AS 1288 (glass in buildings)
- Standards Australia
- National Construction Code (ABCB)
- National Security Screen Association
- Australian Glass and Window Association
- Housing Industry Association
- Window Energy Rating Scheme
Need aluminium glass windows in Carseldine?
Made in Brendale, measured at your place, fitted by our own installers.