Superior Glass Brisbane
Superior Glass Brisbane
Get a Free Quote 07 3353 1588
Mon-Thu 7:30am - 3:30pm | Fri 7:30am - 1:30pm

Aluminium Glass Windows in Strathpine

Made in our Brendale factory, about 5 minutes from Strathpine.

50+ Years in Business
QBCC Licensed & Insured
99+ Google Reviews
Custom Manufacturer

Minutes from our factory

Strathpine windows, made just up the road in Brendale

We build windows at 241 Leitchs Road, Brendale, and Leitchs Road runs straight through into Strathpine. The two suburbs share postcode 4500, so a measure at your place is about a 5 minute drive for one of our team. Our only address is that 1,700 sqm factory and showroom, which means the people who quote your windows work 2 km from where they'll be fitted.

2 km
from our factory
5 minutes
average drive
82.3%
separate houses

10,600 residents (ABS 2021 Census)

We make and fit windows for Strathpine, about 5 minutes from our Brendale workshop.

Why Strathpine chooses custom aluminium glass windows

Windows fail in a predictable order: fogged glass units, corroded frames, glass that predates the safety rules, then whole streets of builder-grade windows aging at once. Strathpine shows every stage because its houses span several building eras. At the 2021 Census the suburb held 10,647 people in 4,238 private dwellings, and 82.3% of occupied homes were separate houses, 3,209 of them averaging 3.2 bedrooms. That’s a lot of windows per street, installed across a lot of different decades.

The first failure is fog. A double-glazed unit is two panes sealed around a spacer, and that sealed gap is what slows heat and blocks noise. When the seal dies, moisture creeps in and the fog sits between the panes where no cloth can reach it. The frame around it is often still sound, which completely changes what the fix should be.

The second is corrosion. Original aluminium and steel frames on Strathpine’s older streets have taken decades of weather. Once the metal pits and the tracks seize, new glass won’t save the frame.

The third is compliance. AS 1288 sets out where Grade A toughened or laminated safety glass is required, including window glazing with sills lower than 500 mm above the floor. Plenty of older low-sill windows went in long before those rules, and owners usually find out when a pane breaks.

The fourth is the newest: builder-grade windows from the later estates are now reaching the end of their working life, showing the same drafts and tired seals street by street.

This is where the 2 km matters. One of our measurers inspects the actual failure at your place and tells you which fix it really is: a resealed unit, new glass, new hardware or a full frame replacement. Whatever the answer, we fabricate it to the existing opening’s exact size at the Brendale factory, non-standard dimensions included. Our own installers fit it, carrying Cert III in Glass and Glazing and Cert III in Carpentry. Diagnosis, fabrication, installation and any callback all run from the same shed up the road.

Aluminium glass windows we make for Strathpine

We make all five aluminium styles for Strathpine jobs, sliding, awning, casement, double-hung and louvre, plus double-glazed units, at the Brendale factory, and fit them with our own crews.

Common window problems we solve in Strathpine

Failed or foggy double-glazed units

A double-glazed unit is two panes sealed around a spacer, and that sealed gap does the insulating. When the seal dies, moisture creeps in and fog forms where no cloth can reach it. A failed unit stops insulating and stops blocking noise, so you're paying double-glazing money for single-glass performance. We check the unit and the frame separately during the free measure. If the frame is sound, we make a new sealed unit at the Brendale factory and swap it in.

Corroded original aluminium or steel frames

First-generation aluminium and steel frames on Strathpine's older streets have taken decades of weather. The metal pits and the tracks seize. Once corrosion takes hold, new glass won't fix a frame that jams or leaks. We fabricate a new aluminium frame to the existing opening, non-standard dimensions included. Our installers hold Cert III in Carpentry as well as glazing, so making good around an old opening is part of the job.

Safety glass at low sills under AS 1288

AS 1288 requires Grade A toughened or laminated safety glass in human-impact areas, including window glazing with sills lower than 500 mm above the floor. Plenty of older Strathpine windows were glazed before those rules existed. Ordinary glass at a low sill breaks into large, dangerous shards, which is what the standard is written to prevent. During the measure we flag low-sill glazing and quote Grade A safety glass where the standard calls for it. The glass comes through our own factory, so the spec is controlled from cutting to install.

The first replacement wave of builder-grade windows

Strathpine is 82.3% separate houses, 3,209 of them built across different eras, and the estates that went up with cost-driven windows are reaching the age where seals and latches give out together. Replacing one tired window at a time gets expensive when the whole set is the same age. We quote the honest scope, one window or the lot, on Vantage aluminium systems. Our workmanship guarantee stands behind the installation.

Recent window work from our Brendale workshop

Aluminium windows made and installed by Superior Glass
Replacement aluminium windows fitted by Superior Glass
New aluminium window installation in Brisbane QLD

Custom window work

Architectural glass windows in Strathpine

That search usually comes from a design-led project: a renovation drawing, or an opening a standard catalogue won't cover. There's no separate product to ask for here. The work behind that search comes from our standard five types pushed to custom shapes: made full height, paired into corner configurations, stacked into banks of louvres, or sized to openings nothing off the shelf will fit. Every window is built to your opening's actual width and height, including non-standard sizing for older homes and new builds. You pick the frame colour and finish, then the glass type for insulation or safety, on Vantage aluminium systems with Breezeway blades for louvres. Bring the drawings to the Brendale showroom, 2 km from Strathpine, and we'll tell you straight what's buildable.

Why Strathpine trusts Superior Glass

Superior Glass has made and fitted glass since 1972, family owned and operated the whole way, with director Nathan Fox still hands-on in daily operations. We manufacture at a 1,700 sqm factory and showroom at 241 Leitchs Road, Brendale, and our own crews do the installing. Those installers hold Cert III in Glass and Glazing and Cert III in Carpentry, which counts on older Strathpine homes where the timber around the frame needs work too. We're QBCC licensed and insured. In Queensland, paid glazing work legally requires a QBCC Glass, Glazing and Aluminium licence, so ask any company quoting you about theirs. On windows we supply Vantage aluminium systems and Breezeway louvre blades, built to custom sizes including non-standard openings. Every installation carries our workmanship guarantee, and the on-site measure and quote are free.

QBCC Licensed
Fully Insured
Cert III Glass & Glazing
Cert III Carpentry
NSSA Compliant
Australian Owned & Family Operated

From Quote to Installation

1

Consultation

We discuss your project and provide expert advice on the best solution for your property.

2

Measure

Our team visits your site to take precise measurements for a perfect fit.

3

Manufacture

Your order is custom built in our 1,700 sqm Brendale factory.

4

Install

Our qualified glaziers professionally install your product with care and precision.

5

Inspect

We inspect the finished work to make sure everything meets our quality standards.

Aluminium Glass Windows in Strathpine: your questions answered

What Strathpine customers say

Need aluminium glass windows in Strathpine?

Made in Brendale, measured at your place, fitted by our own installers.

Call 07 3353 1588 - Free Quote