Aluminium Glass Doors in Strathpine
Made in our Brendale factory, about 5 minutes from Strathpine.
Minutes from our factory
Strathpine doors, made just up the road in Brendale
Strathpine and Brendale share postcode 4500, and the ABS counts them as one statistical area. Leitchs Road runs through both suburbs, and our 1,700 sqm factory and showroom sits on it at 241 Leitchs Road, Brendale, about 2 km from most Strathpine streets. Every door we sell is made in that building and installed by our own crews. So the measure, the build, the install and any callback all run from about five minutes away.
10,600 residents (ABS 2021 Census)
We make and fit doors for Strathpine, about 5 minutes from our Brendale workshop.
Why Strathpine chooses custom aluminium glass doors
The factory that makes your door is a few minutes’ drive from Strathpine. That closeness changes how the whole job runs. The person who measures your opening works at the same site where the door gets built, and the install crew drives about 2 km to reach you.
Strathpine’s housing shapes the work. At the 2021 Census, 82.3% of the suburb’s occupied dwellings were separate houses, 3,209 of them, averaging 3.2 bedrooms. Separate family houses like these commonly need retrofit door work at some point: reviving a tired slider, replacing one outright, converting a slider to a stacker for the patio, or swapping a worn hinged entrance. Every one of those jobs sits within our service range, from glass door repair and replacement through to made-to-measure fabrication across the aluminium door line-up. Frames settle and drift out of square as any house ages, and a stock-size door never sits right in one.
That’s why we make rather than buy. Your opening gets measured as it actually is, then the door is fabricated to those numbers in our 1,700 sqm Brendale factory. The aluminium range covers sliding doors, stacking doors, frameless glass doors and custom aluminium doors, with centre-opening sliders and internal glass doors as options. Aluminium frames are built to resist rust and corrosion, and their slim profiles leave more of the opening as glass.
Standards sit behind all of it. AS 1288 governs glass selection and installation in buildings, including where Grade A toughened or laminated safety glass is required in doors. AS 2047 sets construction and wind-pressure requirements for external glazed doors. Working a few minutes from the job means we can recheck an opening in person instead of trusting someone else’s numbers. Typical residential installs take one to two days. And if anything needs adjusting afterwards, Strathpine sits on the regular runs our service fleet already makes through the Pine Rivers and Moreton Bay corridor.
Aluminium glass doors we make for Strathpine
Every door below is made to measure at the Brendale factory, about five minutes from Strathpine, and installed by our own crew.
Common door problems we solve in Strathpine
Worn rollers and sticking tracks on older sliding doors
Rollers and tracks carry the door's full weight every pass, and years of grit and daily use grind them down. The more years of service a slider has behind it, the more of that wear its rollers carry. Most of Strathpine's housing stock is separate houses, the housing type where sliding doors do the most daily work. A dragging door gets forced, and forcing bends the track further and can chip the glass edge. Glass door repair and replacement is part of our core service list. When a slider is past saving, we measure the opening and make a new door at the Brendale factory, then install it ourselves.
Converting a standard slider to a stacker for alfresco flow
A two-panel slider only ever opens across half its width. Owners of Strathpine's three-bedroom family houses often want the living area to open fully onto the patio instead. A wider glazed opening has to meet AS 2047, the standard that sets construction and wind-pressure requirements for external glazed doors. Stacking doors are a standard part of our aluminium range. We fabricate the panels to the new opening at Brendale, and our installers hold Cert III in Carpentry as well as Cert III in Glass and Glazing, which matters when a job touches the structure.
Replacing a hinged aluminium entrance door
Front entrances cop weather and daily use, and older doors sag on their hinges or look tired well before they stop working. The entry is the first thing anyone sees from the street, and a door that's dropped on its hinges lets in draughts and sticks in humid weather. Our architectural range covers hinged aluminium entrance doors, entry doors and custom entry panels, in single, double or multi-panel layouts with your choice of hardware. Each one is made to measure at the factory.
Out-of-square openings that need custom fabrication
Houses settle over decades, and timber framing moves with moisture, so door openings slowly stop being true rectangles. A stock-size door in an out-of-square frame binds at one corner and gaps at the other. We don't sell off-the-shelf sizes. Our team measures the opening you actually have, and the door is fabricated to those exact numbers in the 1,700 sqm Brendale plant.
Recent door work from our Brendale workshop
Our hinged entrance range
Architectural glass doors in Strathpine
For front entrances, we build from our architectural range: hinged aluminium entrance doors, entry doors and custom entry panels for homes and commercial buildings. Panels come in single, double or multi-panel configurations, with your choice of handles, locks, hinges and privacy options. Commercial entrances get commercial-grade hardware and hinges rated for high-traffic use. We build door and window installations on Breezeway and Vantage systems, and architectural doors can integrate ComfortEdge, a system designed to reduce heat transfer and steady indoor temperatures. An architectural entrance for a Strathpine house is handled the same way as our sliders: measured on site, then fabricated at the Brendale plant a few minutes away and fitted by our own crew. The full architectural door range is at /glass-doors-brisbane/architectural/.
Why Strathpine trusts Superior Glass
Superior Glass Brisbane has made and installed glass since 1972. The business is Australian family owned, and director Nathan Fox still works in it day to day. We're a manufacturer-installer: doors are built in our 1,700 sqm factory and showroom at 241 Leitchs Road, Brendale, and fitted by our own crews. The QBCC requires a Glass, Glazing and Aluminium licence for paid glazing work in Queensland, covering fabricating and installing windows and doors. We're QBCC licensed and insured. Our installers hold Cert III in Glass and Glazing plus Cert III in Carpentry. That second trade earns its keep on door jobs in older houses, where the opening often needs carpentry before the glass goes in. Customers in our Google reviews talk about stacker door and security screen installs and the cleanup afterwards; the reviews are on our site if you want to read them.
Other glazing services in Strathpine
Glass Windows
Aluminium, double glazed, casement, sliding and louvre windows.
Learn more
Security Screens
Prowler Proof and Crimsafe screens and doors to the AS 5039 series.
Learn more
Shower Screens
Frameless, semi-frameless and framed shower screens, cut to fit.
Learn more
Commercial Glass
Shopfronts, office partitions and commercial glazing.
Learn moreFrom Quote to Installation
Consultation
We discuss your project and provide expert advice on the best solution for your property.
Measure
Our team visits your site to take precise measurements for a perfect fit.
Manufacture
Your order is custom built in our 1,700 sqm Brendale factory.
Install
Our qualified glaziers professionally install your product with care and precision.
Inspect
We inspect the finished work to make sure everything meets our quality standards.
Consultation
We discuss your project and provide expert advice on the best solution for your property.
Measure
Our team visits your site to take precise measurements for a perfect fit.
Manufacture
Your order is custom built in our 1,700 sqm Brendale factory.
Install
Our qualified glaziers professionally install your product with care and precision.
Inspect
We inspect the finished work to make sure everything meets our quality standards.
Aluminium Glass Doors in Strathpine: your questions answered
Typical residential door installs take one to two days once your door is made. The making happens at our Brendale factory, about five minutes from Strathpine, so the measure and the install are both short trips for us. Our service fleet covers the Pine Rivers and Moreton Bay corridor on regular runs from Brendale, which keeps measure bookings quick. Call 07 3353 1588 to lock one in.
No. Our only premises is the combined factory and showroom at 241 Leitchs Road, Brendale. That's about 2 km from Strathpine, roughly a five-minute drive, and Leitchs Road itself runs through both suburbs. You're welcome to come in and look at door styles and hardware before deciding, or we'll come to you for the measure.
Yes. We don't stock standard sizes; every door is made to measure at the Brendale factory. Our team measures the opening as it actually is, square or not, and fabricates the door to suit. Houses settle as they age and openings slowly stop being true rectangles, which is exactly the situation made-to-measure fabrication is built for.
Yes, and doing both in one job means one contractor and one set of measurements. We supply and install security screen doors, including Prowler Proof and Crimsafe products. Anything sold as a security screen is covered by the AS 5039 series of Australian Standards, updated across 2023 and 2024, which sets impact and other performance tests. Mention the screen when you book your door measure.
Generally no. Queensland adopted the NCC 2022 7-star energy provisions from 1 May 2024, and they apply to new builds and major renovations. A like-for-like replacement of an existing door in a Strathpine home usually doesn't trigger them. If your new door is part of a larger renovation, we'll flag it at the measure. And if you want better thermal performance anyway, architectural doors can integrate the ComfortEdge system, which is designed to cut heat transfer.
What Strathpine customers say
Also making doors for suburbs near Strathpine
Sources & references
- Australian Bureau of Statistics: Strathpine (2021 Census)
- Queensland Building and Construction Commission
- Australian Standard AS 1288 (glass in buildings)
- Australian Standard AS 2047 (windows and external glazed doors)
- Australian Standard AS 5039 (security screen doors)
- National Security Screen Association
- Australian Glass and Window Association
- Housing Industry Association
Need aluminium glass doors in Strathpine?
Made in Brendale, measured at your place, fitted by our own installers.