Aluminium Glass Doors Bray Park
Bray Park sits about 5 km from our factory and showroom at 241 Leitchs Road, Brendale, and the two suburbs share postcode 4500. Door jobs here run as part of our regular service runs through the Pine Rivers corridor, not as one-off trips. And the door itself is made at that Brendale factory, to your opening’s measurements, before the crew loads it for the short drive over.
Why Bray Park chooses custom aluminium glass doors
The sliding door in a 1980s brick home has usually done forty years of work by now. In Bray Park, that describes most of the housing. Separate houses make up 96.8% of occupied dwellings. The suburb was named in 1970 and its schools opened between 1973 and 1987, which is roughly when the housing went in. The homes are mostly brick, built largely around the 1980s on blocks of roughly 600 square metres. And about 70% are owner-occupied, which means people stay. The original aluminium doors stay with them, sliding on the same tracks until the rollers seize or the glass gives out.
So the typical door job here is a like-for-like replacement in an existing opening rather than a renovation showpiece. A worn slider off the family room. A hinged back door with a pitted frame. That work has its own demands: the opening was framed decades ago and may not be square anymore, so the new door has to be made to the opening, not pulled from a stock size chart.
That’s the work we’re set up for. We measure the opening as it sits today, then make the door to those measurements at our own 1,700 sqm factory in Brendale, about 5 km up the road. Our installers hold Cert III in Glass and Glazing and Cert III in Carpentry, which counts in older openings where the frame or reveal needs correcting before the new door goes in. Most residential installs take one to two days. Because we also supply and install Prowler Proof and Crimsafe security screens, the screen door gets specified and fitted in the same job, so you’re not booking a second contractor later.
A quick note on the energy rules. Queensland’s NCC 2022 provisions, with the 7-star rating, apply to new builds and major renovations from 1 May 2024. A like-for-like door replacement generally doesn’t trigger them. If better sealing matters to you, we’ll talk glass and sealing options on their merits.
Architectural glass doors in Bray Park
Not every door in Bray Park is a slider. If you’re replacing the front entrance, our architectural range covers hinged aluminium entrance doors, entry doors, and custom entry panels for homes and small businesses. Panels come in single, double, or multi-panel configurations, with your choice of handles, locks, hinges, and privacy options. We build these installs on Breezeway and Vantage systems, and the doors can integrate the ComfortEdge system, which is designed to reduce heat transfer and keep indoor temperatures steadier. On a 1980s brick frontage, a new entrance door is one of the few upgrades you can see from the street. The full range is on our architectural door range page at /glass-doors-brisbane/architectural/.
Superior Glass has been making and fitting glass since 1972, and it’s still Australian family-owned, with director Nathan Fox hands-on in daily operations. We’re the manufacturer and the installer: doors are made at our 1,700 sqm factory and showroom at 241 Leitchs Road, Brendale, then installed by our own crews. Queensland law requires a QBCC glass, glazing and aluminium licence to carry out paid glazing work, including fabricating and installing doors, and Superior Glass is QBCC licensed and insured. Our installers hold Cert III in Glass and Glazing and Cert III in Carpentry. Most residential door installations take one to two days, and Bray Park jobs run as part of regular service runs through the Pine Rivers and Moreton Bay corridor from the Brendale base.