Aluminium Glass Doors in Carseldine
Made in our Brendale factory, about 14 min from Carseldine.
Minutes from our factory
Carseldine doors, made just up the road in Brendale
The doors tell you how old the house is. Most of Carseldine went up through the 1980s and 90s, and the aluminium sliders fitted back then are often still in their tracks, decades on. We make their replacements at our 1,700 sqm factory in Brendale, a short run away, and our own installers fit them.
10,093 residents (ABS 2021 Census)
We make and fit doors for Carseldine, about 14 min from our Brendale workshop.
Why Carseldine chooses custom aluminium glass doors
While 900 new homes rise on the former QUT campus at 532 Beams Road, most of Carseldine is ageing in the other direction. The suburb took shape in the 1970s and did most of its growing through the 1980s and 90s, and it’s still best known for brick-and-tile homes from those decades, single and double storey, with newer 2000s houses on smaller blocks up the northern end. Roughly 71% of occupied homes here are separate houses. That mix matters for one simple reason: a separate house from that era usually still runs its original aluminium sliders.
Doors that old become the weak point of an otherwise solid house. Rollers wear flat. Tracks pit and catch. Frames corrode where decades of weather found a way in. And the openings were sized for how people lived then, a single slider onto a small patio, which is rarely how anyone wants to use a backyard now.
The Carseldine Urban Village sharpens the contrast. Economic Development Queensland is delivering around 900 homes plus retail, commercial and recreation space on the 53 ha site in stages. Those homes arrive with new glazing built in. The established streets around them only catch up when an owner decides the original doors have done their time.
That decision is the job we’re set up for. Every replacement door is made to measure at our 1,700 sqm Brendale factory, so a 1990s opening that’s moved out of square gets a door built for the opening as it is today. Our installers hold Cert III in Glass and Glazing and in Carpentry, which earns its keep when a frame or sill needs correcting before the new door goes in. Under AS 1288, glass in a door has to be Grade A safety glass, toughened or laminated, and the complete external door unit falls under AS 2047, the Australian Standard that covers wind loading on external glazed doors. The range runs from straight replacement sliders to stacking, frameless and custom aluminium doors, with bi-fold and centre-opening setups for entertaining areas.
Aluminium glass doors we make for Carseldine
Every configuration below is made to measure at our Brendale factory and fitted by our own installers. Colour, finish, door style and glass panel are all up to you.
Common door problems we solve in Carseldine
Doors sticking as the house settles
Brick homes from the 1980s and 90s across Brisbane's northside have often settled a little over the decades, and Carseldine has street after street from that era. Even small movement pulls a door opening out of square, so the slider drags at one end of its track. A dragging door chews through rollers and flexes the glass and frame every time someone forces it. We measure the opening as it sits today, out of square included, and make the new door to suit at our Brendale factory. Our installers hold carpentry as well as glazing qualifications, so the frame can be corrected during the install rather than worked around.
Corroded frames and seized hardware
Queensland weather works its way into old frames, locks and roller housings until the hardware seizes, and matching parts for a discontinued door system are hard to track down. On Gympie Road, the suburb's major commercial corridor, shop and office doors take constant daily use on top of the weather. A door that no longer closes and locks cleanly leaves a house, or a shopfront, less secure every night it stays that way. We replace the complete unit, frame included, with new aluminium sections built to resist rust and corrosion, in slim profiles that keep the glass area large and the light coming in. Commercial doors are fitted with commercial-grade hardware and hinges rated for high-traffic use.
Openings too small for how you entertain
A house of that age was usually fitted with a single standard-width slider onto the yard and nothing wider, and the bulk of Carseldine's housing dates to the 1980s and 90s. Households now treat the patio as a second living area, and a single door-width opening was never built for that. A narrow opening walls the deck off from the living room, so the outdoor space gets used far less than it could. We build bi-fold, stacking and centre-opening doors to measure, so most of the wall can open up for entertaining. Wide external openings have to meet the wind-load requirements of AS 2047, so we settle what the wall can carry at the consultation and measure stage, before anyone commits to a size.
Worn rollers and sticking tracks on old sliders
Rollers flatten with use and the track wears down with them. The back slider is the door a household opens and shuts more than any other in the house, so it is usually the first one to give up. A heavy door gets slammed or left open, and either way it wears faster and the house sits less secure. Where a roller swap won't last, we replace the slider with a new made-to-measure door running on new track, and a straightforward swap like that is usually in and out inside a day or two.
Recent door work from our Brendale workshop
Our hinged entrance range
Architectural glass doors in Carseldine
Replacing the front entrance is a different job from the back slider, and it's the job our architectural range covers. These are hinged aluminium entrance doors, entry doors and custom entry panels for homes and commercial properties. Panels come in single, double or multi-panel configurations, with a choice of handles, locks, hinges and privacy options. We build with Breezeway and Vantage systems, and doors can integrate ComfortEdge, a system designed to cut heat transfer through the door and keep indoor temperatures steadier. For shops and offices, commercial architectural doors carry commercial-grade hardware and hinges rated for high-traffic use. If a Carseldine entrance upgrade is on your list, our architectural door range sets out the panel, hardware and glass options in one place.
Why Carseldine trusts Superior Glass
Superior Glass Brisbane has made and fitted glass since 1972. We're Australian family-owned, and director Nathan Fox is still hands-on in the business day to day. Doors are manufactured at our own 1,700 sqm factory and showroom at 241 Leitchs Road, Brendale, then installed by our own crews. Our installers hold Cert III in Glass and Glazing and Cert III in Carpentry. Queensland law requires a QBCC glass, glazing and aluminium licence for paid glazing work, and we're QBCC licensed and insured. AS 1288 requires Grade A safety glass in doors, and AS 2047 sets what external glazed door units have to meet, wind loading included. A large service fleet covers North Brisbane and the Pine Rivers corridor, so a Carseldine job runs as part of regular local runs from Brendale. If you want a security screen door over the new glass, we supply and install Prowler Proof and Crimsafe screens in the same job.
Other glazing services in Carseldine
Glass Windows
Aluminium, double glazed, casement, sliding and louvre windows.
Learn more
Security Screens
Prowler Proof and Crimsafe screens and doors to the AS 5039 series.
Learn more
Shower Screens
Frameless, semi-frameless and framed shower screens, cut to fit.
Learn more
Commercial Glass
Shopfronts, office partitions and commercial glazing.
Learn moreFrom Quote to Installation
Consultation
We discuss your project and provide expert advice on the best solution for your property.
Measure
Our team visits your site to take precise measurements for a perfect fit.
Manufacture
Your order is custom built in our 1,700 sqm Brendale factory.
Install
Our qualified glaziers professionally install your product with care and precision.
Inspect
We inspect the finished work to make sure everything meets our quality standards.
Consultation
We discuss your project and provide expert advice on the best solution for your property.
Measure
Our team visits your site to take precise measurements for a perfect fit.
Manufacture
Your order is custom built in our 1,700 sqm Brendale factory.
Install
Our qualified glaziers professionally install your product with care and precision.
Inspect
We inspect the finished work to make sure everything meets our quality standards.
Aluminium Glass Doors in Carseldine: your questions answered
No. Our only site is the factory and showroom at 241 Leitchs Road, Brendale, which is where every door is made. If you'd like to see door styles and glass options before deciding, you're welcome at the Brendale showroom, a short run from Carseldine.
Yes. Original sliders in Carseldine's 1980s and 90s brick-and-tile homes are usually near the end of their working life by now. Because the work stays in-house rather than being subbed out, one crew handles the on-site measure, the build and the fit. The replacement is made for your exact opening at the Brendale factory, and if the years have pulled a frame off true, the crew carries carpentry tickets alongside glazing, so it's set right on the day rather than left for another trade.
Residential door installations typically take one to two days. Bigger jobs, like converting a wall for a stacking or bi-fold door, get scoped at the consultation and measure stage so you know the timeframe before work starts. Since our crews are already working the northside out of Brendale, a Carseldine measure is usually quick to book in.
Often, yes, and which one suits comes down to the opening. A bi-fold folds back into a stack, a stacker slides its panels behind one another, and a centre-opening pair parts from the middle, so the choice follows how much of the wall you want to clear. Whether the wall can take a wide opening rests on the site's wind-load rating, worked out on the measure visit before a size is fixed. The door is then built to those measurements at Brendale, in the Grade A safety glass doors require.
Yes, and in the same job. We supply and install Prowler Proof and Crimsafe security screen doors as well as glass doors, so the screen is measured and fitted alongside the new door instead of being retrofitted later by a second contractor. Products sold as security screens are covered by the AS 5039 series of Australian Standards.
Every door gets Grade A safety glass, toughened or laminated, as AS 1288 requires for glass in doors. The complete unit is covered by AS 2047, which includes wind-load performance for external glazed doors. You choose the colour, finish, door style and glass panel type, so the new door reads as part of the house.
What Carseldine customers say
Also making doors for suburbs near Carseldine
Sources & references
- Australian Bureau of Statistics: Carseldine (2021 Census)
- Queensland Places: Carseldine
- Queensland Building and Construction Commission
- Australian Standard AS 1288 (glass in buildings)
- Australian Standard AS 2047 (windows and external glazed doors)
- Australian Standard AS 5039 (security screen doors)
- National Security Screen Association
- Australian Glass and Window Association
- Housing Industry Association
Need aluminium glass doors in Carseldine?
Made in Brendale, measured at your place, fitted by our own installers.