Superior Glass Brisbane
Superior Glass Brisbane
Get a Free Quote 07 3353 1588
Mon-Thu 7:30am - 3:30pm | Fri 7:30am - 1:30pm

Aluminium Glass Doors in Everton Hills

Made in our Brendale factory, about 14 min from Everton Hills.

50+ Years in Business
QBCC Licensed & Insured
99+ Google Reviews
Custom Manufacturer

Minutes from our factory

Everton Hills doors, made just up the road in Brendale

Everton Hills sits close to our factory. We're at 241 Leitchs Road, Brendale, a short drive away up South Pine Road through Eatons Hill and Albany Creek. Our install crews already pass through this pocket on regular North Brisbane and Moreton Bay runs, so a measure and quote here slots into the schedule quickly.

9 km
from our factory
14 min
average drive
81%
separate houses

6,673 residents (ABS 2021 Census)

We make and fit doors for Everton Hills, about 14 min from our Brendale workshop.

Why Everton Hills chooses custom aluminium glass doors

Between Bunyaville’s bushland and the Brisbane City boundary, Everton Hills is a hilly 3.3 square kilometre wedge in the City of Moreton Bay. It makes up the Hills District with Arana Hills and Ferny Hills, pressed against Everton Park and Mitchelton on the south-east side with conservation park behind it. Flat land is scarce. The first estates went in from 1965 south of South Pine Road, a northern estate followed around 1975, and the population jumped from 2,048 in 1971 to 4,707 in 1981 before it levelled off. Most of the housing stock here dates from that stretch, and most of those houses sit on a slope.

That combination is hard on doors. A house on a sloping block keeps moving in small ways for decades after it’s built. Frames that were square when the slab was poured aren’t square now. Sliding doors start dragging at one end of the track. Hinged doors catch the jamb at the top corner. You end up lifting and shoving a door you should just slide.

And in this suburb, that’s the owner’s problem to fix. 81.2% of dwellings are separate houses and 70.5% are owner-occupied. The big rear opening onto the deck gets used year round, so a door that drags gets noticed every day.

An off-the-shelf door assumes a square opening. After decades on a hillside, yours probably isn’t. So we measure the opening as it is today, then make the door to those measurements at our own 1,700 sqm factory in Brendale. Our installers hold Cert III in Glass and Glazing and Cert III in Carpentry, so when a jamb is out or the head has sagged, they correct the frame instead of packing a stock door into a crooked hole. We’ve been trading since 1972, which makes the business older than most of the houses in Everton Hills.

Aluminium glass doors we make for Everton Hills

Every door below is made to measure at our Brendale factory and installed by our own crews. This is what we build for Everton Hills homes and small businesses.

Common door problems we solve in Everton Hills

Doors that stick as the house settles

Most Everton Hills houses were built between 1965 and the early 1980s on sloping blocks, and decades of slow ground movement pull door openings out of square. A door that needs a shove won't seal or lock cleanly, and every forced close wears the track and hardware faster. Our installers hold Cert III in Carpentry as well as Glass and Glazing, so they can correct a dropped or twisted frame first, then fit a door made at Brendale to the opening's real measurements.

Corroded old frames and hardware

Plenty of doors around here are originals, and decades of Queensland weather leave locks, rollers and tracks pitted and seized. Corroded hardware makes a heavy glass door heavier, and a lock that won't throw properly leaves the door unsecured. We replace the full unit with a new aluminium-framed door. Aluminium frames are designed to resist rust and corrosion, and the slim profiles give you more glass and more light.

Bi-fold and servery openings for entertaining areas

Owners who've held these houses for years often want the back wall opened up to the deck instead of one narrow sliding panel. A wide opening only works if the doors are sized for the span; AS 2047 sets wind-load requirements for external glazed door openings. We manufacture stacking, bi-fold and pivot-hinge doors ourselves, and our carpentry-qualified installers check the existing frame and opening before anything gets built.

Worn rollers and sticking tracks on older sliding doors

A sliding door that's run on the same track since the 1970s carries decades of grit, and its rollers flatten and seize. Once rollers fail, the door grinds metal on metal and chews up the track it needs to run on. We handle glass door repair and replacement as part of regular runs through this corridor. Where the track is past saving, we make a full replacement door to measure at Brendale.

Recent door work from our Brendale workshop

Bi-fold aluminium glass doors installed on Brisbane northside by Superior Glass
Architectural glass doors fitted to a Brisbane home
Hinged aluminium entry door made and fitted in QLD

Our hinged entrance range

Architectural glass doors in Everton Hills

Some Everton Hills entries need more than a standard sliding unit. Our architectural range covers hinged aluminium entrance doors, entry doors and custom entry panels for homes and commercial properties. Panels come in single, double or multi-panel configurations with your choice of handles, locks, hinges and privacy options. We build with Breezeway and Vantage systems, and doors can integrate ComfortEdge, which is designed to reduce heat transfer and keep indoor temperatures steadier. That's worth considering on an exposed hillside entry that cops afternoon sun. Commercial jobs get commercial-grade hardware and hinges rated for high-traffic use. See the full range at /glass-doors-brisbane/architectural/ or ask us which entry panel suits your opening.

Why Everton Hills trusts Superior Glass

Superior Glass has been making and fitting glass doors since 1972, Australian family-owned, with director Nathan Fox still hands-on in daily operations. We're a manufacturer-installer, not a middleman: doors are made to measure at our 1,700 sqm factory and showroom at 241 Leitchs Road, Brendale, then fitted by our own crews. Those installers hold Cert III in Glass and Glazing and Cert III in Carpentry, the mix you want when a 1970s frame is no longer square. We're QBCC licensed and insured. The glass itself is governed by Australian Standards: AS 1288 requires Grade A safety glass in doors, and AS 2047 covers external glazed doors, including wind loading. Most residential door installs take 1 to 2 days. And because we supply and fit Prowler Proof and Crimsafe security screens too, a screen door can go on in the same job as your new glass door.

QBCC Licensed
Fully Insured
Cert III Glass & Glazing
Cert III Carpentry
NSSA Compliant
Australian Owned & Family Operated

From Quote to Installation

1

Consultation

We discuss your project and provide expert advice on the best solution for your property.

2

Measure

Our team visits your site to take precise measurements for a perfect fit.

3

Manufacture

Your order is custom built in our 1,700 sqm Brendale factory.

4

Install

Our qualified glaziers professionally install your product with care and precision.

5

Inspect

We inspect the finished work to make sure everything meets our quality standards.

Aluminium Glass Doors in Everton Hills: your questions answered

What Everton Hills customers say

Need aluminium glass doors in Everton Hills?

Made in Brendale, measured at your place, fitted by our own installers.

Call 07 3353 1588 - Free Quote